
Maintenance spares sit awkwardly between two departments. Maintenance knows what spares are needed and when; stores knows what is in stock. In many factories the two don't talk: maintenance keeps its own cupboard of "emergency" spares, stores holds a list of items nobody can identify, and when a critical bearing is needed at midnight, it is in neither place. Meanwhile, the stores ledger shows lakhs of rupees in spares, many for machines scrapped years ago.
Connecting the maintenance system with inventory solves both problems — the missing spare and the dead stock. This guide explains how.
Spares linked to machines
The foundation is a link between each spare and the machines it fits. A bearing record should say which machines and positions use it; a machine record should list its spares. With this link:
- A technician working on a machine sees its spares and their stock immediately.
- When a machine is scrapped, its unique spares are identified for disposal or reuse.
- Duplicate items — the same bearing entered three times under different descriptions — become visible, because they fit the same positions.
Building the link takes effort, best done machine by machine, starting with critical machines. Manuals, parts lists and the spares already in the cupboard are the sources.
Issue against work orders
Spares should leave the store against a maintenance work order — breakdown or preventive — just as production material is issued against production work orders. The technician scans the work order and the spare, or the storekeeper does it at the counter. This gives:
- Consumption per machine — which machines consume the most spares, and which ones.
- Consumption per failure type — the same bearing replaced every few weeks points to a root cause, not a stocking problem.
- Maintenance cost per machine — spares plus labour plus outside services, the basis for repair-or-replace decisions.
- Control — spares no longer disappear into private cupboards.
Critical spares
Not every spare deserves stock. A practical way to decide uses three questions for each spare:
- Impact — if this part fails and there is no spare, does a critical machine stop?
- Lead time — how long does it take to get one? Local stock in hours, imported parts in weeks.
- Usage — how often is it consumed?
Spares with high impact and long lead time are critical: keep stock even if usage is rare. High-usage consumables — filters, belts, lubricants — need stock for convenience. Low-impact, short-lead-time spares can be bought when needed. Our guide to spare parts criticality and stocking strategy covers the method in detail.
Minimum levels from real consumption
Once spares are issued against work orders, minimum and reorder levels can be set from actual consumption and lead times rather than guesswork. A spare used twice a year with a two-week lead time needs a minimum of one; a filter used weekly with a one-week lead time needs more. The system can propose levels and flag items whose stock is far above what consumption justifies.
Preventive maintenance checks spares in advance
Preventive maintenance is planned, so its spares can be too. When a PM task is due next week and it replaces a set of filters and belts, the system can check stock now and raise a purchase request if needed. Kits for major PM tasks can be reserved or prepared in advance. Nothing is more frustrating than stopping a machine for planned maintenance and finding the spares aren't there — it is also one of the main reasons production stops trusting PM.
Repairable spares
Motors, pumps, gearboxes, hydraulic valves, servo drives and electronic boards are often repaired rather than replaced. A repairable spare cycles: installed on a machine, removed when it fails, sent to a repair vendor, returned to stock, installed again. Each unit should be tracked individually by serial number, with its location (machine, store, at vendor), repair history and cost. This prevents the common situation where a factory pays for the same motor's repair repeatedly without noticing that a replacement would be cheaper, or loses track of units at repair vendors. Repair vendor dispatches are tracked like any job-work challan.
Dead and obsolete spares
Most factories have spares that will never be used: for machines scrapped or sold, for models replaced years ago, or bought in excess. A connected system makes them easy to find:
- Spares with no issue in two or three years.
- Spares linked only to machines that are no longer active.
- Duplicates of the same part under different codes.
Review these with maintenance before disposal — some old spares are critical for old machines still running — but most can be sold, returned or written off, releasing cash and space.
The maintenance store: one store or two?
Some factories keep spares in the main store; others give maintenance its own store. Either works if transactions are recorded in the same system. The worst arrangement is the common one: an official store with records, and an unofficial maintenance cupboard without. If technicians keep a small stock of frequently used items at the maintenance workshop, make it a recorded location with its own stock, replenished from the main store.
Purchasing for maintenance
Maintenance purchases are often urgent and small: a specific seal, a sensor, a contactor. The purchase request should come from the work order, so purchase knows why it is needed and how urgent it is, and the cost goes to the right machine. Approved suppliers for each spare, with last price and lead time, speed up urgent purchases. Emergency purchases above normal price, recorded as such, show the cost of not stocking critical spares.
Spares and safety
Some spares are safety-critical: guards, interlock switches, emergency stop components, brake parts on presses and cranes. These deserve their own flag, stock of genuine parts from approved sources, and a record of each replacement. Substituting an unapproved part to get a machine running quickly can create a hazard that nobody notices until an accident. Keeping these spares visible in the system helps make sure the right parts are always available.
Rolling it out
- Count and clean the spares list — identify items, remove duplicates, locate everything.
- Link spares to critical machines first.
- Start issuing against work orders, with the maintenance cupboard recorded as a location.
- Mark critical spares and set minimum levels.
- Track repairables by serial number.
- After a year, review dead stock with maintenance.
Lubricants, consumables and kits
Lubricants, greases, hydraulic oils, filters, belts and fasteners are consumed constantly and are often managed loosely. Linking them to machines and PM tasks — this machine takes this grade of oil, this quantity at each change — keeps the right lubricant at the right point and shows consumption per machine. Unusually high oil consumption on a hydraulic machine is a leak worth fixing. PM kits — the filters, belts and seals for a specific service — can be defined once and reserved before each service, so technicians collect a complete kit rather than searching for items. Our guide to lubrication management covers lubricant practice.
Spares for new machines
When a new machine is bought, its recommended spares list usually arrives with it, and the supplier often offers a spares package. This is the best moment to link spares to the machine, decide which are critical and set minimum levels — and also to check which recommended spares are already in stock for other machines. Without a connected system, new machines bring a new cupboard of spares, some duplicating items already held under different names.
Cannibalising: when it is acceptable
Under pressure, technicians take parts from an idle machine to repair a running one. Sometimes this is the right decision. Unrecorded, it creates a hidden problem: the idle machine is now unserviceable, and nobody knows until it is needed. Recording cannibalised parts as a transfer — removed from machine A, installed on machine B — with an automatic follow-up work order to restore machine A keeps the picture honest and makes sure the replacement part is ordered.
Vendor-managed and consignment spares
For some high-usage items — bearings, belts, fasteners, cutting fluids — suppliers offer vendor-managed stock or consignment, where they keep the shelf filled and bill on consumption. These arrangements work well when consumption is recorded reliably against machines and work orders, because both sides can then agree usage from the same records. Without reliable issue records, consignment stock quickly becomes a source of disputes.
A worked example
An engineering plant had a stores ledger with several thousand spare items, many with vague descriptions, and a maintenance cupboard with no records. Breakdowns were regularly extended while someone drove to the market for a part, yet the stores valuation for spares kept rising.
The plant cleaned the spares list, linked spares to its 25 most critical machines, and moved the maintenance cupboard into the system as a location. Spares were issued against work orders on technicians' phones. Within six months, consumption data showed which spares were truly critical; minimum levels were set for them, and urgent market purchases dropped sharply. A review of items with no movement for three years identified a large value of spares for machines no longer in the plant, much of which was sold. Repairable motors were tagged and tracked, revealing two that had been repaired several times at a combined cost above that of a new motor.
Who owns spares decisions
Spares decisions need both departments. Maintenance knows what is critical and how parts fail; stores and purchase know stock, lead times and costs; accounts sees the money tied up. A short quarterly review with all three — critical spares list, minimum levels, dead stock, urgent purchases and repairables at vendors — keeps the balance between availability and cost, and stops spares policy from being set by whoever complained last.
Starting small
It is tempting to begin by cataloguing every spare in the plant. That project can take months and stall before any benefit appears. Starting with the ten or twenty most critical machines, their spares and their work orders delivers value within weeks, and the method then extends machine by machine.
Measures to watch
- Breakdown hours waiting for spares.
- Urgent and emergency purchases for maintenance, by value.
- Spares stock value and its trend.
- Value of spares with no movement in two years.
- Spares cost per machine, alongside maintenance labour and outside services.
The result of linking the two systems is a spares stock that is smaller, better targeted and actually available when a critical machine stops — and a maintenance team that spends its time repairing machines rather than searching for parts.
As with most factory improvements, the technology is the easy part. The discipline of issuing every spare against a work order, keeping the maintenance cupboard in the system and reviewing the critical list each quarter is what delivers the result.
Working with Corposol
Corposol builds custom maintenance and inventory software as modules of one system, so spares, work orders and machines are linked from the start. Read our use case for an engineering plant. All custom code is transferred to you on final payment.
Frequently asked questions
Why link maintenance with inventory?
So that spares are issued against maintenance work orders, consumption is known per machine and failure, minimum levels are based on real usage, and planned maintenance can check that spares are available before the work is scheduled.
Which spares should be kept in stock?
Those whose absence would stop a critical machine for longer than you can accept, considering the supplier's lead time — plus high-usage consumables. Many other spares can be bought when needed.
What are repairable spares?
Components that are removed, repaired and returned to stock — motors, pumps, gearboxes, hydraulic valves, PCBs. They need their own tracking because they cycle between machine, repair vendor and store.
How do we reduce money tied up in spares?
Identify spares that haven't moved for a long time, spares for machines that no longer exist, and duplicates under different names. Base minimum levels on actual consumption and lead time rather than guesswork.
