Manufacturing & custom software · Bengaluru · Whitefish, USA
Use case · Engineering manufacturing

Machine Maintenance Management Software for an Engineering Plant

How Corposol implemented machine maintenance management software for an engineering plant: breakdowns raised from the shop floor by phone, preventive maintenance by calendar or run hours with checklists, machine history, spares and repeat-failure flags.

The client

The client is an engineering manufacturing plant in India with a mixed machine base: CNC lathes and machining centres, mechanical and hydraulic presses, moulding machines, and utilities such as compressors, cooling towers, DG sets and cranes. A small maintenance team covers mechanical and electrical work across shifts. At the client's request we do not publish its name.

The challenge: maintenance by phone call and memory

  • Breakdowns were reported by shouting or phoning. There was no record of when a machine stopped, when maintenance arrived or what was done.
  • Preventive maintenance lived in a notebook. Schedules were easy to postpone when production was busy, and hard to check afterwards.
  • No machine history. Without records, the team couldn't see that the same fault had happened three times in two months.
  • Spares were a surprise. Critical spares were often found to be out of stock only when they were needed.
  • Management had no measures of downtime, repair time or PM completion to act on.

What we implemented

We built maintenance management software with two audiences in mind: the shop floor, who need to report problems in seconds, and the maintenance team, who need a clear list of what to do and somewhere to record what they did.

1. Breakdown tickets from a phone

Any supervisor can raise a breakdown by scanning the QR label on a machine, choosing the problem, adding a photo and saying whether production has stopped. The ticket goes straight to maintenance. The technician records when they started, the root cause, the work done and the spares used, and the supervisor confirms the machine is back in production.

Breakdown ticket for an injection moulding machine with problem, assignment, root cause and spares, machine history for 90 days and an automatic repeat-failure flag
Breakdown ticket and machine history, with a repeat-failure flag raised automatically. Illustrative screen with sample data.

2. Preventive maintenance that schedules itself

Each machine has PM tasks with an interval, by calendar days, run hours or counts, and a checklist. The system generates the jobs, assigns them, and shows them as due, done or overdue. Technicians complete the checklist on their phone, item by item, with readings and photos where needed. Utilities under vendor AMCs, such as compressors and DG sets, get scheduled vendor visits with reports attached.

Preventive maintenance schedule for the week listing machines, tasks, triggers, due dates, assignees, checklists and status including done, due and overdue
Preventive schedule: tasks by calendar or run hours, each with its checklist and status. Illustrative screen with sample data.

3. Machine history and repeat failures

Every breakdown and PM is stored against the machine. The system flags repeat failures, the same fault on the same machine within a set period, so the team investigates the root cause instead of fixing the symptom again. Lessons can be turned into new checklist points.

4. Spares linked to machines

Spares are listed against the machines that use them, with minimum stock levels for critical items. Spares used on tickets are deducted from stock, and items below minimum are flagged to purchase.

5. Measures management can use

Downtime by machine and reason, mean time to repair, mean time between failures and PM completion are calculated from the tickets and jobs themselves, not from separate spreadsheets.

How the rollout worked

Breakdown reporting went live first, because it was the biggest daily pain and needed only the machine list and QR labels. With a few weeks of breakdown data, we sat with the maintenance head to set PM tasks and checklists, starting with the machines whose failures cost the most production. Spares and reports followed once the team was used to recording work in the app.

The results

The software was delivered and is used by production supervisors and the maintenance team every day. The main changes:

  • Every breakdown is recorded, from the moment it is raised to the moment the machine is back.
  • PM is scheduled and visible, so postponed jobs show up as overdue rather than disappearing.
  • Machine history is available to everyone, and repeat failures are flagged automatically.
  • Critical spares are watched before they run out.
  • Management sees real maintenance measures to decide where to invest.

Planning a maintenance system?

See our maintenance management (CMMS) software and preventive maintenance pages, or read CMMS for small factories and how to calculate MTTR and MTBF. All custom code is transferred to you on final payment.

Frequently asked questions

Do we need a maintenance planner to use this?

No. The system was designed so that the maintenance head can run it alongside other work: PM jobs are generated automatically from schedules, and technicians see their own list on their phones.

Can PM be based on machine run hours rather than dates?

Yes. Each PM task can be triggered by calendar interval, by run hours or by counts. Run hours can be entered by the team or collected from machine signals where available.

Can vendor AMC visits be tracked too?

Yes. Equipment under an annual maintenance contract, such as compressors or DG sets, can have scheduled vendor visits, with the vendor's report attached to the job.

Who owns the software?

The client. All custom code built for a project is transferred to the client on final payment.

Let's talk about your factory's software

Tell us about your process or idea. You'll get a free consultation and a clear, fixed quote — no obligation.

  • Free consultation
  • Prototype before you commit
  • Fixed, itemised quote
  • You own the software

Get a free quote

We reply within one working day. Your details are never shared.