
Most small factories plan on a whiteboard. Machines down the left, days across the top, jobs written in marker, magnets for status, and a planning meeting every morning in front of it. It is cheap, visible and flexible, and for a factory with ten machines and one planner, it works remarkably well.
Then the factory grows. Thirty machines, two shifts, a second bay, more customers and more urgent orders. The whiteboard is rewritten several times a day, nobody is sure it is current, the night shift can't see it, the owner asks for status on the phone, and the planner spends more time updating the board than planning. This guide explains how to move from the whiteboard to a live digital plan board without losing what made the whiteboard work.
What the whiteboard does well
Before replacing it, be clear about what the whiteboard gets right — the digital board must keep these qualities:
- Everyone sees the same thing. One plan, in one place, in front of the team.
- It is simple. Machines, jobs and days — no training needed.
- It is flexible. The planner can move a job in seconds.
- It drives a conversation. The morning meeting happens in front of it.
Where the whiteboard breaks
- It shows the plan, not progress. Actual status depends on someone updating it, so it is usually hours behind.
- It is in one place. The second bay, the night shift, sales and the owner can't see it.
- It has no memory. Once wiped, yesterday's plan and what actually happened are gone, so nobody can learn from plan versus actual.
- It doesn't calculate. It can't tell you that the jobs on a machine add up to more hours than the shift has, or that material for a job hasn't arrived.
- It depends on one person. When the planner is away, the board goes stale.
What a live plan board shows
A live board keeps the whiteboard's layout — machines or lines down the side, time across — and adds what paper can't:
- Plan and actual together. Each job shows its planned quantity and the quantity booked so far, updated as operators book output.
- Status by colour. Running, waiting, stopped, completed, delayed — consistent colours, readable from a distance.
- Problems first. Stopped machines, jobs behind plan and missing material highlighted so the eye goes to them.
- Load against capacity. Hours planned against hours available per machine and shift, so overload is visible before it happens.
- Next jobs. What each machine runs next, so setups can be prepared.
Where the data comes from
A board is only live if its data is. In most SME factories, the sources are:
- The plan, made by the planner in planning software — or even, in the first phase, entered directly on the board screen.
- Operator or supervisor bookings on shop-floor tablets: job started, quantity produced, job completed, machine stopped with a reason. See our guide to Android tablets on the shop floor.
- Machine signals, optionally, for run/stop status and counts where machines can provide them.
- Stores and purchase, for material availability against upcoming jobs.
The single most important source is shop-floor booking. Without it, the board is just a whiteboard on a screen, updated by the planner by hand.
Three views for three audiences
The shop-floor board
A large TV in the bay showing the current shift: each machine's current job, plan versus actual, status colour and next job. Designed for distance — large text, few columns, nothing that needs scrolling. It replaces the walk to the whiteboard and makes problems visible to everyone, including the operators.
The planner's board
On the planner's PC: the full plan by machine for the coming days or weeks, with drag-and-drop to move jobs, load against capacity, material status and orders at risk. Changes here flow immediately to the shop-floor board.
The owner's and sales view
On a phone: orders and their expected completion, machines stopped right now, today's output against plan. This replaces the phone calls to the planner for status.
Keeping the morning meeting
The morning planning meeting in front of the whiteboard is valuable — don't lose it. Hold it in front of the shop-floor screen or a large screen in the planning area. The difference is that the meeting starts from yesterday's actual results rather than from memory: which jobs finished, which are behind and why, which machines stopped, and what that means for today. Decisions made in the meeting are entered on the board during the meeting, so everyone leaves with the same plan. Our guide to tier meetings and daily production meetings covers how to structure the meeting itself.
Designing a board people can read
- One screen, no scrolling. If the bay has too many machines for one screen, split by area or rotate pages slowly.
- Large text. Readable from where people actually stand.
- Consistent colours. Green running, amber waiting or setup, red stopped or behind, grey idle or planned stop. Never use colour alone — add a label or icon.
- Problems at the top. Sort or highlight so that stopped machines and late jobs are seen first.
- Familiar layout. Keep the whiteboard's rows and columns so the team recognises it immediately.
Moving from whiteboard to screen
- Photograph the whiteboard on a few typical days and design the screen to look like it.
- Start with the plan only: the planner enters the plan on screen, the board is displayed beside the whiteboard.
- Add shop-floor booking on one section, so that section's progress updates automatically.
- Run both boards for a few weeks, comparing them in the morning meeting.
- Retire the whiteboard section by section as the screen proves accurate.
- Add the planner's tools — load, material checks, at-risk orders — once the basic board is trusted.
Plan versus actual: the board's memory
The quiet benefit of a digital board is that it remembers. Every day's plan and actual are kept, so after a few weeks you can see schedule adherence by machine and shift, the common reasons for falling behind, and how often urgent orders disrupted the plan. These numbers turn the morning meeting from a status update into improvement: the same reasons appearing week after week are the ones to fix.
Handling urgent orders on the board
Urgent orders are where whiteboards fail most visibly. The planner rubs out three jobs, squeezes in the urgent one and rewrites the rest — and the knock-on effect on other orders is lost. On a digital board, inserting an urgent job shows immediately which jobs move and which orders will now be late. The planner can try alternatives — a different machine, an extra shift, splitting the urgent job — and see the effect before committing. Sales can be told the consequences for other customers in the same conversation. Over time, the board's history shows how often urgent orders disrupt the plan, which is useful when discussing order intake with sales and customers.
Shift handover on the board
The night shift is often the least informed part of the factory. With a whiteboard, the night supervisor works from whatever was written at 6 pm. A live board gives the incoming shift the same view as the outgoing one: what is running, what is behind, which machine stopped and why, and what comes next. A short handover note per machine, entered by the outgoing supervisor, adds the context that numbers can't. Our guide to shift handover in manufacturing covers the practice in detail.
What the board should not do
It is tempting to put everything on the shop-floor screen: OEE charts, quality trends, safety statistics, birthday messages. Resist it. The plan board's job is to show what should be happening now and whether it is. Other information can go on a separate rotating screen or in the office. A board that tries to show everything is read by no one. Similarly, the board should not be a place where people enter data; data comes from bookings at the workstation, and the board displays it.
Hardware and cost
A live board needs very little hardware: a large television with a small computer or streaming device to show a web page, mounted securely, with a reliable network connection. The cost is modest compared with the time a planner spends rewriting boards and answering status calls. Place screens where people naturally pass and stop — near the supervisors' desk, the entrance to the bay or the inspection area — rather than where there happens to be a wall.
Common mistakes
- Building the board before booking. A board without shop-floor booking needs manual updates and goes stale like the whiteboard did.
- Too much detail. Minute-by-minute schedules on a shop-floor screen are unreadable and change constantly. Shift-level or job-level is usually enough.
- Changing the layout the team knows. A completely new layout makes people distrust the screen. Start familiar, then improve.
- No owner. Someone — usually the planner — must own the plan on the board and keep it current, just as they owned the whiteboard.
- Ignoring the night shift. Make sure the board is visible and meaningful for every shift, not only when the planner is present.
Boards for more than production
Once a live board works for production, the same approach suits other teams that plan on whiteboards: the toolroom's list of tools due for maintenance, the maintenance team's open breakdowns and preventive tasks, the quality team's pending inspections, and dispatch's loading plan for the day. Each uses the same principles — familiar layout, data from bookings rather than manual updates, problems first — and each removes another set of status phone calls. Start with production, prove it, and extend team by team.
A worked example
A sheet-metal fabrication unit with 28 machines across laser cutting, bending, welding and powder coating planned on two whiteboards, one per bay. The planner rewrote them twice a day; the night shift worked from a printed list. The owner, travelling to customers, called the planner several times a day for status.
The unit put a large screen in each bay showing the same layout as the whiteboard, with the plan entered by the planner on a PC. Supervisors booked job completion on phones at first, then operators on shared tablets. After a month, the whiteboards came down. The owner checked status on his phone instead of calling. The plan-versus-actual history showed that bending was the real bottleneck — not laser cutting, as everyone had assumed — which changed the next machine investment.
Getting started
- Photograph your current whiteboard and list who looks at it, when and why.
- Decide the board's rows (machines or lines) and time buckets (shift or day).
- Put the plan on a screen next to the whiteboard.
- Start shop-floor booking on one section so its progress updates itself.
- Hold the morning meeting in front of the screen, and retire the whiteboard when the team trusts it.
Working with Corposol
Corposol builds custom production planning software and live shop-floor boards for Indian SMEs, as part of our manufacturing software work. Read our use case for a precision machining company. All custom code is transferred to you on final payment.
Frequently asked questions
What is a live production plan board?
A screen — on the shop floor, in the planning office or on a phone — that shows the current plan by machine or line and the actual progress against it, updated from shop-floor entries rather than by hand.
Do we need machine connectivity for a live board?
No. Most live boards in SMEs are updated from operator or supervisor entries on tablets. Machine signals can add run status where machines support them.
Should we throw away the whiteboard?
Not on day one. Run both for a few weeks, keep the board's layout familiar on the screen, and retire the whiteboard when the team trusts the screen.
What screen size is needed on the shop floor?
A large TV of 43 inches or more, readable from several metres, mounted where supervisors and operators pass. Content must be designed for distance: few columns, large text and clear colours.
