
In a CNC machine shop, cutting tools are a significant running cost — often one of the largest after labour, material and power. Yet in many small and mid-sized shops, tools live in drawers at each machine, in a cupboard with an informal register, or in the operator's own box. Inserts are used once and thrown away before their edges are exhausted, drills are reground until nobody knows how short they are, special tools go missing, and the shop discovers it has run out of a critical insert at 11 pm on a Saturday.
A tool crib — a controlled tool store with simple records — fixes most of this. This guide explains how to organise one in an SME machine shop, how to handle issue, return and regrinding, and how the records lead to something most shops don't know: tool cost per part. It complements our broader guides to tool management software and tool life management.
What goes in the crib
- Inserts — turning, milling, grooving and threading, by grade and geometry.
- Solid tools — carbide and HSS drills, end mills, reamers, taps.
- Special tools — form tools, special boring bars, custom cutters.
- Holders and adaptors — tool holders, collets, boring heads.
- Gauges — plug and ring gauges, thread gauges, often with calibration due dates.
- Consumables — grinding wheels, deburring tools, abrasives.
Organise first, then record
Records are only useful if the physical store is organised. Before any software:
- Sort and count. Collect tools from machines and drawers. Most shops find more stock — and more obsolete stock — than they expected.
- Code every tool type. A code per insert grade and geometry, per drill size and type, per holder. Use the maker's part number as a reference, not as your only code, because equivalent tools from different makers should be comparable.
- Give each code a location — cabinet, drawer, bin — labelled with a barcode or QR code.
- Separate new, reground and used tools so that each can be issued and costed correctly.
Issue and return against jobs
The core discipline is that tools leave the crib against something: a job, a machine or an operator. A simple issue screen — scan the operator's badge, scan the job card, scan the tool's bin label, enter the quantity — records who took what, for which job. Returns are handled the same way, with the condition: reusable, for regrind or scrap.
Two common practices reduce waste quickly:
- Exchange for used. A new insert or tool is issued only against the return of the used one. This stops hoarding at machines and gives the crib a chance to check whether edges were fully used.
- Issue in tool kits per job. For repeat parts, a kit of the tools needed for the setup is prepared in advance, with the setup sheet. This cuts setup time and makes tool issue per part predictable.
Regrinding and resharpening
Carbide drills, end mills, reamers and many special tools can be reground several times, at a fraction of the cost of new tools. Regrinding needs its own records:
- Tool identification — for valuable tools, an individual number etched or labelled on the shank.
- Regrind count and current length or diameter.
- Minimum length or regrind limit, after which the tool is scrapped.
- The regrind vendor or in-house grinder, dates sent and received.
- Cost per regrind.
Tools sent to an outside regrinding service go on a challan and are tracked like any job-work, so they are not lost. Reground tools come back to the crib and are issued as reground, with their own cost.
Reorder levels and lead times
Running out of a critical insert stops a machine; overstocking ties up cash in expensive tools that may become obsolete when the job ends. For each tool code, set:
- A minimum level based on average consumption and the supplier's lead time.
- A reorder quantity that suits the supplier's pack size.
- A flag for critical tools — those for which no alternative exists — with a higher safety margin.
Consumption from issue records makes these levels evidence-based. Our guide to safety stock and reorder level calculation explains the method. Tools linked to parts also allow a forward check: when a large order for a part is planned, the system can check that enough of its tools are in stock.
Tool cost per part
When tools are issued against jobs, the cost of tools consumed — new tools at purchase cost, reground tools at regrind cost — can be divided by the good parts produced. The result, tool cost per part, is useful in several ways:
- Quoting: new parts can be estimated with real tooling costs for similar work instead of a rule of thumb.
- Process improvement: a part with unusually high tool cost is a candidate for a different grade, geometry, cutting parameters or coolant.
- Supplier comparison: tool trials can be judged on cost per part, not price per insert.
- Operator training: large differences in tool consumption between shifts on the same part point to practice differences.
Gauges in the crib
Many machine shops keep gauges in the same crib. Each gauge should have an individual number, a calibration due date and a status. The crib should not issue a gauge whose calibration is overdue, and returns should be checked for damage. Our calibration management guide covers the details.
Who runs the crib
In a large shop, a full-time crib attendant runs the store. In a small shop, the role is often combined with stores or with a setter. Either way, someone must own it: keeping locations tidy, processing returns, sending regrinds, watching reorder levels and running a monthly count of high-value items. When nobody owns the crib, it drifts back into drawers at the machines within months.
Tool life and the crib
The crib is the natural place to collect information about how long tools actually last. When a used insert or tool is returned, recording the job and the number of parts it produced — or the time in cut, where the machine reports it — gives real tool life by part and material. Compared with the tool maker's recommendations, it shows where tools are changed too early (wasting edges) or too late (risking quality and breakage). Our guide to tool life management in machining explains how to set and manage tool life limits on the machine.
Presetting and setup sheets
In shops with a tool presetter, the crib often prepares assembled and preset tools for each setup, with offsets recorded and sent to the machine. Even without a presetter, preparing the tools for the next job while the current one runs shortens setups considerably. A setup sheet for each part and operation — tools by position, holders, inserts, offsets and cutting data — kept with the part in the system and printed or shown on the tablet for each kit, makes this routine and reduces errors when a different operator sets the job.
Tool trials
Tool suppliers regularly offer trials of new grades and geometries. Without records, trials are judged on the operator's impression and a few parts. With issue records and tool life by part, a trial can be judged properly: parts per edge, cost per part, surface finish and cycle time compared with the existing tool over a meaningful run. Recording each trial — tool, part, parameters, result and decision — builds a history that prevents the same trials being repeated every year with each new sales representative.
Obsolete and slow-moving tools
When a customer stops ordering a part, the special tools and spare inserts bought for it remain in the crib. Over years, a significant amount of money ends up in tools that will never be used. Linking tools to parts makes it possible to list tools whose parts have not been ordered for a year or more, so they can be used elsewhere, returned to the supplier where possible, or written off deliberately rather than discovered at the next annual stock-take.
Measures for the crib
A few numbers, reviewed monthly, show whether the crib is working: tool spend per machine hour or per good part, stock value in the crib and its trend, the number of stock-outs of critical tools, the share of drills and end mills reground rather than replaced, and the value of tools issued without a job reference. The last measure is a good test of discipline: if a large share of issues have no job, tool cost per part cannot be calculated and the crib is drifting back to informal control.
Tools at the machine versus in the crib
Not every tool needs to come from the crib for every job. Standard tools used on almost every part — common drills, centre drills, chamfer tools — can live in a fixed set at each machine, replenished by the crib on exchange. Special tools, expensive solid carbide tools and part-specific kits come from the crib per job. Deciding which tools live where, and writing it down for each machine, removes most of the friction between operators who want tools at hand and the crib's need for control. The fixed machine sets should be checked regularly against their list, so they don't slowly grow into a private crib at each machine.
A worked example
A machine shop with 26 CNC machines making valve and pump components kept inserts in a cupboard with a register and allowed operators to keep tools at their machines. The owner knew tool spend was rising but not why.
The shop set up a crib with coded, labelled bins, introduced issue against job cards with exchange for used inserts, and started recording regrinds for carbide drills and end mills. Within a few months, issue records showed that a handful of parts accounted for a large share of insert consumption, and that one shift used noticeably more inserts than the others on the same parts. Changing the insert grade on two parts and retraining on edge indexing reduced consumption, and regrinding brought down spend on solid carbide tools. The shop now quotes new parts with tool cost per part from similar work.
Security and access
Expensive tools disappear from open cupboards. A lockable crib, with access limited to the attendant or a setter during each shift and an after-hours procedure for urgent issues, protects the investment without slowing production. Every issue, including after-hours ones, should be recorded against a job and a person. Where a small shop cannot staff the crib on every shift, a locked cabinet with a simple issue log on a tablet beside it is a practical middle ground.
Getting started
- Sort, count, code and locate every tool type.
- Start issue and return against job cards, with exchange for used.
- Record regrinds for valuable tools.
- Set reorder levels from a few months of consumption.
- Calculate tool cost per part for your main parts.
Working with Corposol
Corposol builds custom tool management software — tool cribs, die and mould records, regrinding and tool cost — for Indian machine shops and manufacturers, as part of our manufacturing software work. All custom code is transferred to you on final payment.
Frequently asked questions
What is a tool crib?
A controlled store for cutting tools, inserts, holders, gauges and small consumables in a machine shop, where tools are issued to operators or machines and returned, reground or scrapped.
Should every insert be tracked individually?
No. Inserts and small consumables are tracked by type and quantity. Individual records are worth keeping for expensive or regrindable tools such as solid carbide drills and end mills, special form tools, boring bars and holders.
How do we know tool cost per part?
By recording tool issues against jobs or parts, and dividing the cost of tools consumed — including regrinds — by the good parts produced.
Can tool vending machines replace a crib attendant?
In larger shops, tool vending or locked cabinets can control issues of consumables. Small and mid-sized shops usually get most of the benefit from simple issue and return records against jobs.
