
India is the world's second-largest producer of forgings after China, and the industry is spread across well-known clusters: Pune, with some of the largest automotive forging companies; Chennai and its surroundings, serving the automotive and engineering hub of Tamil Nadu; Ludhiana and the Punjab cluster with its bicycle, tractor and hand-tool forgings; Rajkot and Gujarat's export-oriented forgers; and many more in Jamshedpur, Kolkata, Bengaluru and elsewhere. The Association of Indian Forging Industry (AIFI) represents more than 200 forging companies, and thousands of small and mid-sized units supply them or customers directly.
Forging is energy-intensive, capital-intensive and unforgiving of mistakes. Steel is expensive, dies are costly to make and maintain, and customers — especially in automotive, tractor, railway, oil and gas and defence — expect full traceability and consistent quality. Yet many forging shops still run on paper job cards, die registers and spreadsheets. This guide explains what software a forging shop needs and how to introduce it.
Where the money goes in a forging shop
The main cost and profit levers in forging are well known:
- Material yield — input weight versus net forging weight, including flash, scale loss, end pieces and rejects.
- Die cost and die life — die steel, sinking, repairs and the forgings produced per die set.
- Press utilisation — time lost to die changes, die repairs, waiting for material, heating problems and breakdowns.
- Energy — furnace and induction heating, often one of the largest costs after material.
- Rejections and rework — laps, cracks, underfill, mismatch, dimensional errors and hardness failures.
- Outsourced processes — heat treatment, machining and surface treatment sent to job workers.
Software does not change the physics of forging, but it measures these levers per job, die, press and shift — which is what makes improvement possible.
Raw material and heat-number traceability
Traceability in forging starts with the steel. A practical system records:
- Bars or billets received by grade, size, supplier, mill heat number and test certificate, with incoming inspection results such as chemistry and hardness checks where performed.
- Cutting of bars into billets for each job, with the heat number carried to the billet lot.
- Forged lots linked to their billet lots, and onwards to heat treatment batches, machining lots and dispatches.
With this chain in place, when a customer reports a problem with a part, the shop can identify the steel heat, the forging date and press, the die set, the heat treatment batch and the inspection results in minutes — and list every other lot that shares the same steel heat or heat treatment batch.
Die management
Dies are among a forging company's most valuable assets, and die problems are a leading cause of downtime and rejections. A die and tool management module typically covers:
- Die register — die sets by part number, impressions, die steel, location and status (ready, in use, under repair, re-sinking, scrapped).
- Life tracking — strokes or forgings produced per die set, accumulated from production records or press counters.
- Maintenance triggers — inspection, polishing or re-sinking due at a set count, with a work order raised automatically.
- Repair history — what was done, by whom, time and cost, and the reason (for example wear, crack, heat check).
- Die readiness for planning — the planner sees whether the die needed for a job is ready before scheduling it.
- Cost per forging — die cost and repair cost spread over the forgings produced.
When a part's die life suddenly drops, the history shows whether the cause is die steel, heat treatment of the die, heating temperature of billets, lubrication or a design issue.
Press scheduling
Scheduling a forging shop means matching jobs to presses or hammers of the right capacity, with dies that are ready, material that is cut and available, and heating capacity to match. Die changes are long, so jobs for the same die are grouped where possible. A planning module lets the planner see each press's queue, die availability and material status on one screen, move jobs between presses and update promised dates as production progresses.
Production recording on the press line
On the forging line itself, the system records for each job and shift:
- Billets issued and forgings produced — automatically from press stroke signals where possible.
- Heating records — furnace or induction heater, temperature readings where available.
- Rejections at the press, with reason codes.
- Downtime with reasons — die change, die problem, heater problem, no material, no operator, breakdown.
- Trimming and piercing output.
Simple screens at the press, or a supervisor tablet, are enough. The value comes from seeing yield, output and downtime per job, press and shift every day instead of at month end.
Heat treatment, shot blasting and further processes
After forging, parts typically go through heat treatment (normalising, hardening and tempering, or other processes), shot blasting, inspection and often machining. Software tracks each lot through these steps, recording furnace batches and cycle records, hardness test results and the lots in each batch. Where heat treatment or machining is done by outside vendors, a job work module tracks quantities sent and received, process records returned by the vendor, losses and pending balances by vendor.
Inspection and quality
Forging customers typically require first-piece approval, in-process and final dimensional inspection, hardness and sometimes microstructure checks, crack detection by magnetic particle inspection, and sometimes ultrasonic testing. A quality module records these against the lot, holds lots that fail until a decision is made, and links rejections to corrective actions. Gauges and instruments are tracked for calibration, so inspections are not done with out-of-calibration equipment. Customer-specific documents — inspection reports, test certificates, process records — can be produced from the same data.
Yield and costing
With input weight, forged weight, rejections, die cost, energy and outsourced process costs recorded per job, the actual cost of each forging can be calculated and compared with its quoted price. Many forging companies discover that a few parts with poor yield or short die life are quietly eating the profit made on others. Steel prices change frequently and customer price agreements often include raw material adjustments; accurate data on actual input weight per part supports those discussions. See production costing software.
A worked example: a lap defect at the customer
A forging company near Pune supplies crankshaft-related forgings to an engine maker. The customer finds a lap defect on parts from a recent delivery and asks for an investigation and containment.
Without software, the quality team searches dispatch records, then job cards, then die registers and heat treatment logs. It takes two days to establish which forging dates and die set are involved, and the customer holds all stock from the supplier in the meantime.
With traceability and die records in place, the lot number on the rejected part leads straight to the forging date, press, shift, die set and billet heat number. The die history shows that the die set had passed its planned polishing interval because a maintenance work order was postponed during a rush. Containment covers exactly the lots forged since that point, the die is corrected, and the customer receives a clear report the same day.
Energy
Heating is one of the largest costs in forging. Where furnaces and induction heaters have meters, energy use can be recorded per shift and per job and compared with the weight forged. Idle heating during long stoppages, furnaces running below capacity and differences between shifts become visible. See energy management software.
Maintenance of presses and auxiliaries
Presses, hammers, heaters, trimming presses and shot blasting machines all need planned maintenance. Breakdown records linked to downtime data show which machines cause the most lost production, and preventive maintenance schedules keep them running. A maintenance module can share the same downtime data as production, so there is one version of the truth.
Machining and finished-part supply
More and more customers prefer to buy machined, ready-to-assemble parts rather than raw forgings, and many Indian forging companies have added machining shops to capture that value. That adds a new layer of complexity: machining routings, CNC programs, tool life, in-process gauging and final dimensional inspection, as well as the link between forged lots and machined lots. A system that already tracks forged lots can extend naturally into machining, so traceability runs unbroken from steel heat to finished part, and machining scrap is linked back to forging problems such as excess stock or mismatch where that is the cause.
Export customers and their requirements
Forgings are one of India's significant engineering exports, to automotive, agricultural, oil and gas and general engineering customers in Europe, North America and elsewhere. Export customers typically expect production part approval documents, regular inspection data, full traceability and fast responses to quality concerns, and they audit their suppliers. When production, die, traceability and inspection records are in one system, preparing approval documents and supporting audits takes far less effort, and the company can show its process control rather than describe it.
Multi-plant forging groups
Many forging companies operate more than one plant — separate units for small and large forgings, a machining unit, or plants in different states close to customers. One cloud system gives each plant its own presses, dies, stock and production, while management compares yield, die cost, rejections and on-time delivery across plants. Dies and material transferred between plants keep their history, and customers' orders can be planned on whichever plant has the right press capacity.
People and skills
Skilled forging operators, die setters and die makers are hard to find and take years to develop. Recording who set up each die, who ran each job and the results achieved helps identify the most effective practices and the people who can teach them. Setup checklists and standard parameters for each part and die, shown on the screen at the press, help newer operators work to the same standard and reduce the startup scrap that follows every die change.
What to digitise first
- Material receipt with heat numbers and billet cutting.
- Job cards on the press line — output, rejections and downtime.
- Die register, die life and die maintenance.
- Heat treatment, inspection and job work tracking.
- Planning, yield, costing and dashboards.
Questions to ask a software partner
- How will heat numbers be carried from bars to billets, forgings and dispatches?
- How will die life be counted, and how will die maintenance be triggered?
- Can stroke counts be taken from our presses and hammers?
- How will outsourced heat treatment and machining be tracked?
- Can the system share data with our accounting software?
- Who owns the code and the data?
Working with Corposol
Corposol is a Bengaluru-based company that builds custom manufacturing software — die and tool management, traceability, production tracking, quality and costing — for Indian and international manufacturers. Read our use case for a Peenya hydraulic equipment manufacturer with 11 factories. All custom code is transferred to you on final payment.
Frequently asked questions
What does forging shop software do?
It plans forging jobs on presses and hammers, tracks steel from mill heat to forged lots, manages dies and their life, records heating, forging, trimming, heat treatment, shot blasting, machining and inspection, and measures yield, scrap and downtime by job and press.
Can it count strokes from our presses?
Often, yes. Many presses can provide a stroke signal, and older presses and hammers can usually be fitted with a simple sensor. We confirm the approach press by press during scoping.
Can it track die life and die maintenance?
Yes. Strokes or forgings produced are counted per die set, maintenance and re-sinking are triggered by count or condition, and every repair is recorded in the die's history.
Can it handle job work for heat treatment and machining?
Yes. Material sent to outside heat treaters or machinists can be tracked by lot, with quantities sent and received, process records returned by the vendor, and any losses.
We already use Tally or an ERP. Do we need to replace it?
Usually not. The forging shop system handles production, dies, traceability and quality, and shares data with the accounting system where it offers an import facility, export or API. We confirm what's feasible during scoping.
