Manufacturing & custom software · Bengaluru · Whitefish, USA
Manufacturing

Factory Asset Management and Asset Tracking Software Development: A Guide for Manufacturers

How custom factory asset management and asset tracking software is built: asset registers, QR and RFID tagging, movement tracking for tools, moulds, gauges and equipment, maintenance and depreciation links, mobile audits, integrations and cost drivers.

By Corposol Team··7 min read
Operator holding a moulded part beside an injection moulding machine
Photo: 08 Изготовление ТЕРМО редукции 2 by XlaDen, CC BY-SA 4.0 (cropped)

A factory's assets go far beyond what appears in the fixed asset schedule. Machines and utilities, yes — but also moulds and dies, fixtures and jigs, gauges and instruments, forklifts and trolleys, laptops and tablets, and often customer-owned tooling worth more than the machines it runs on. When these are tracked in spreadsheets, the same questions keep coming up: Where is it? Who has it? When was it last checked? Is it ours or the customer's? What has it cost us?

Factory asset management software answers those questions from one register. This guide explains what such a system contains, how tagging and tracking work in practice, how it connects to maintenance and finance, and what drives the cost of custom asset tracking software development.

Why factories build asset systems

Generic asset tracking products are designed for office IT equipment or fleet vehicles. Factories need more:

  • Assets that move between machines and sites — moulds and dies move between presses, gauges between inspection stations, fixtures to job work vendors.
  • Usage-based condition — shot counts for moulds, strokes for press tools, calibration due dates for gauges.
  • Ownership — customer-owned tooling that must be returned, insured and reported on.
  • Links to maintenance, production and quality — a tool past its life should not be issued; a gauge overdue for calibration should not be used.
  • Finance — capitalisation, depreciation, transfers between plants and disposals, consistent with the books.

What the system contains

Asset register

Each asset has a unique code, category, description, make, model, serial number, purchase details, cost, owner, current location, custodian, status and documents. Categories carry their own fields: cavities and shot life for moulds, range and least count for gauges, capacity for cranes, IP address for network devices.

Hierarchy and locations

Plants, buildings, areas, lines and storage locations form a location tree. Assets can also have parent-child relationships, such as a machine with its motor, gearbox and hydraulic power pack.

Tagging

Every asset carries a tag — a QR code label, a metal plate for harsh environments, or an RFID tag. Scanning opens the asset on a phone with its details and actions. See QR code asset tagging for practical tag choices.

Movements and custody

Issue, return, transfer between locations or plants, dispatch to a vendor or customer, and receipt back — each a scan with date, person and reason. The system always knows where an asset is and who is responsible.

Condition, usage and life

Readings such as shots, strokes, running hours or uses update the asset's life. Alerts warn when maintenance, regrinding, refurbishment or replacement is due. See tool life management and mould maintenance.

Inspection and calibration

Periodic checks and calibration with due dates, results and certificates. An overdue gauge is blocked from use. See calibration management software.

Audits

Physical verification by scanning assets location by location on a phone. The system shows what was found, what is missing and what was found in the wrong place — turning an annual exercise that took weeks into one that takes days.

Finance

Capitalisation date, cost, depreciation method and rate, accumulated depreciation, transfers and disposals, aligned with the accounting books. Reports for auditors and insurers come from the same register.

QR, barcode or RFID?

OptionStrengthsLimitationsGood for
QR code labelsLow cost, readable with any phone, can hold a linkNeed line of sight; labels can wearMost factory assets
Metal or engraved platesSurvive heat, oil and washingHigher cost per tagMoulds, dies, heavy equipment
Passive RFIDNo line of sight; bulk readingTags and readers cost more; metal and liquids affect readingHigh-movement items, gate tracking, fast audits
Active tags / BLEReal-time locationBatteries, infrastructureHigh-value mobile assets, specific use cases

Start with the cheapest option that solves the problem, and add more sophisticated tags only where they pay for themselves.

Integrations

  • Maintenance (CMMS) — the same asset register drives preventive maintenance and breakdown records. See CMMS software development.
  • Production / MES — tools and moulds are issued to jobs, usage is counted from production, and life updates automatically.
  • Quality — gauge status checked before inspection results are accepted.
  • Stores and purchase — new assets received from purchase orders; spares linked to assets.
  • Accounts — capitalisation and depreciation exported to Tally or the ERP.

The mobile app

Most asset transactions happen away from a desk. The app should let users scan to view, issue, return, transfer, inspect and audit, attach photos, work offline in stores and sheds, and sync later. Supervisors approve transfers and disposals from their phones.

Rolling it out

  1. Decide what counts as an asset and the categories with their fields.
  2. Clean the list — merge the fixed asset register, maintenance lists, tool room records and stores lists. Expect duplicates and gaps.
  3. Tag by area — one area at a time, verifying details as tags are applied.
  4. Start movements and checks for the asset types that cause the most problems: often moulds, dies, gauges or customer tooling.
  5. Run the first scanned audit and resolve the differences.
  6. Connect maintenance, production and finance in later phases.

What drives development cost

  • Number of asset categories with their own fields and rules.
  • Movement workflows and approvals.
  • Tag technology — RFID readers and gate integration add effort.
  • Offline mobile requirements.
  • Depreciation methods and finance integration.
  • Integrations with CMMS, MES, quality and stores.
  • Data cleaning and the initial tagging exercise.

See manufacturing software development cost for how factory projects are estimated.

Measures that show it is working

  • Time to locate a mould, die or gauge drops from hours to minutes.
  • Annual verification completes in days, with fewer missing assets.
  • No overdue gauges in use; no tools past life issued.
  • Customer tooling audits answered from a report.
  • Asset register and books agree.

A worked example: moulds in an injection moulding plant

Consider a moulding plant with 120 moulds, about a third owned by customers, running on 25 machines. Before the system, moulds were found by walking the shop and the store; shot counts were estimated from production registers; and customers asking for the condition of their moulds received a hand-written note.

With asset software, each mould carries a metal QR plate. When a mould is loaded, the setter scans the mould and the machine; shots are counted from production output or the machine's counter; and when the mould is unloaded, it is scanned back to its rack. Preventive maintenance is triggered by shots — cleaning every few thousand, a full service at a higher count — and any damage found at unloading raises a repair request with photos. Customers receive a monthly report of shots, maintenance and condition for their moulds. See mould maintenance for injection moulding for the maintenance side.

Data to collect for each asset category

CategoryKey fieldsLife or condition measure
MachinesMake, model, serial, capacity, controller, installation dateRunning hours, breakdowns, MTBF
MouldsPart, cavities, material, owner, rack locationShot count, maintenance due
Press tools and diesPart, stations, ownerStrokes since regrind, total strokes
Gauges and instrumentsRange, least count, calibration agencyCalibration due date, results
Fixtures and jigsPart, machine, ownerUses, inspection date
Material handlingCapacity, registration, inspection certificateStatutory inspection due
IT equipmentSerial, user, warrantyWarranty end, replacement date

Common mistakes

  • Tagging before cleaning the list — tags end up on assets with wrong or duplicate records.
  • Labels that do not survive — paper labels on moulds and dies fall off within weeks. Choose tag material for the environment.
  • Movements recorded only in the store — if issues to machines and vendors are not scanned, the system's location is quickly wrong.
  • No owner for the register — someone must be responsible for additions, disposals and audits.
  • Finance and operations on separate lists — keep one register with fields for both.

Working with Corposol

Corposol is a manufacturing software development company founded in 2018 in Bengaluru, India, with a US company, Corposol LLC, in Montana. We build factory asset management software as cloud web applications with Android and iOS apps where they help, connect them to the systems you already use where those systems allow it, deliver in phases, and transfer all custom code to you on final payment. If you are planning a project, we are happy to walk through your current process and suggest a sensible first phase.

Frequently asked questions

What is the difference between asset management and asset tracking?

Asset management covers the whole life of an asset — acquisition, location, maintenance, cost, depreciation and disposal. Asset tracking is the part that records where an asset is and who has it. Factories usually need both in one system.

Should we use QR codes or RFID tags?

QR codes are inexpensive, durable when printed on suitable labels or metal plates, and readable with any phone camera. RFID allows reading without line of sight and reading many tags at once, which helps for frequent movements or large counts, but costs more in tags and readers. Many factories start with QR codes and add RFID only where it pays off.

Can the asset register feed our accounts?

Yes. Asset additions, transfers, disposals and depreciation values can be exported or sent to Tally or your ERP where it offers an import or API, so the finance team and the plant work from the same register.

Can we track customer-owned tools and moulds?

Yes. Each asset can carry an owner, so customer-owned moulds, dies, fixtures and gauges are tracked with their location, usage, condition and maintenance history — useful when customers ask for an audit.

  • Asset tracking software development
  • Factory asset management
  • QR code asset tagging
  • Fixed asset register
  • Custom software

Let's discuss your factory's software

Tell us about your process or idea. You'll get a free consultation and a clear, fixed quote — no obligation.

  • Free consultation
  • Prototype before you commit
  • Fixed, itemised quote
  • You own the software

Get a free quote

We reply within one working day. Your details are never shared.