
Choosing who builds your factory software matters as much as deciding what to build. The right manufacturing software development company understands production, writes software your operators actually use, and stays with you after launch. The wrong one delivers screens that look fine in a demo and are abandoned on the shop floor within months.
This guide gives you a practical way to choose a development company, agency or partner for custom ERP, MES, CMMS, inventory, quality or planning software — whether you are a manufacturer in India or abroad. It includes the questions to ask, what good answers sound like and the red flags to watch for. For general advice on picking any software team, see our guide to choosing a software development partner.
Before you contact anyone: prepare a brief
You will get better proposals, and be able to compare them, if every company receives the same brief. It does not need to be long:
- What you make, how many plants, lines, machines and people.
- The problem: where time or money is lost today, and what you want to see instead.
- The processes involved, with sample registers, job cards, inspection sheets and reports.
- Systems in use: Tally, ERP, Excel, existing software, machines with data interfaces.
- Who will use the system and on what devices.
- Your timeline and any budget range you are comfortable sharing.
15 questions to ask a manufacturing software development company
Experience
- What manufacturing software have you built, and can you show it? Look for working screens from similar processes — production booking, stores, quality, maintenance — not just generic web projects. Clients' names may be confidential, but the software and the problems it solved should be explainable.
- Which of our processes have you worked with before? Job work, blanket orders, heat-number traceability, recipes, mould maintenance — specific experience shortens the learning curve.
- Who will work on our project? Meet the analyst and lead developer, not only the salesperson. Ask how long they have been with the company.
Process
- Will you visit or walk through our shop floor before estimating? A company that estimates without understanding your process will either overprice to cover risk or underprice and recover through change requests.
- What will the written scope contain? Modules, screens, roles, reports, integrations, data migration, assumptions and exclusions.
- How do you deliver — in phases, with demos? You should see working software every few weeks, not only at the end. See the custom software development process.
- How will operators be involved in screen design? Adoption on the shop floor is the most common failure point.
- How do you handle changes? Changes are normal; there should be a simple written process with impact on cost and dates.
- How do you test, and how will we accept each phase? Ask about user acceptance testing — see our UAT guide.
Technology and data
- How will the system work on the shop floor? Tablets, barcode scanning, offline use, local languages, label printing.
- How will you integrate with our existing systems? Tally, ERP, e-invoicing, machine data — and what depends on those systems' capabilities.
- Where will it be hosted, and how is data secured and backed up? See security basics for custom business apps and hosting and backups.
Ownership and support
- Will we own the source code? You should receive the code and documentation, so another team could maintain it if ever needed.
- What happens after go-live? Warranty period, support hours, response times, and how improvements are handled and priced.
- Which legal entity will we contract with, and under which law? This matters most when working across borders.
Red flags
- A firm price for "an ERP" or "an MES" before anyone has understood your process.
- Only generic portfolio items; no examples of shop-floor or factory software.
- Everything promised in the first phase, with a single delivery at the end.
- No clear answer on code ownership, or licence fees for software built for you.
- Reluctance to put scope, exclusions and the change process in writing.
- Only the salesperson is available before signing.
Agency, freelancer or in-house team?
Freelancers can be economical for small, well-defined apps but carry continuity risk. An in-house team gives control but is slow and costly to build for a one-off system. A development company or agency brings a team with analysis, design, development, testing and support under one contract. Our article on freelancer versus agency versus in-house developers compares them, and hiring manufacturing software developers covers team models.
Working with a company in another country
Many manufacturers in the USA, UK, Europe and the Middle East work with development teams in India, and many Indian manufacturers work with teams in other cities. What makes it work is the same everywhere: a clear scope, regular demos, a named contact, overlapping hours for calls, and a contract with a known entity. Ask how the company has handled time zones and site visits before.
Running a fair selection
- Shortlist two or three companies with genuine manufacturing experience.
- Send each the same brief and offer each a walkthrough of your process.
- Ask for a written scope, phase plan and estimate.
- Compare understanding of your process, scope coverage, phase plan, ownership and support — then price.
- Speak to the people who will do the work.
- Consider a small paid first phase to test the relationship before committing to a large programme.
On pricing, see manufacturing software development cost.
A simple scoring sheet
To compare companies fairly, score each from 1 to 5 on the factors below and weight them by importance to you:
| Factor | What to look for | Suggested weight |
|---|---|---|
| Understanding of our process | Asked good questions, described our workflow back accurately, spotted exceptions | High |
| Relevant experience | Working factory software shown, similar processes | High |
| Scope quality | Clear modules, assumptions, exclusions, phases | High |
| Shop-floor usability | Simple operator screens, offline, scanning, languages | Medium–high |
| Team | Met the analyst and lead developer; stable team | Medium |
| Ownership and exit | Code and data ownership, documentation | Medium |
| Support | Warranty, response times, improvement process | Medium |
| Price and payment terms | Reasonable for the scope, milestone-based | Medium |
Price matters, but a company that scores low on understanding your process will cost more in the end, however low its quote.
What a good proposal looks like
- A summary of your business and problems in the company's own words — proof that they listened.
- The proposed solution by module, with the users and devices for each.
- A phase plan with what goes live when.
- Integrations and data migration, with what they depend on.
- Assumptions and exclusions stated plainly.
- The team, the project approach, and how you will be involved.
- Estimate and payment milestones linked to deliverables.
- Code ownership, hosting, support and warranty terms.
Reference checks
Ask to speak with an existing client, ideally a manufacturer. Many factory clients prefer not to be named publicly, so references are often given privately. Useful questions: Did the software go live on time? How did the company handle changes? Are operators still using it? How is support after go-live? Would you hire them again?
Signs of a good long-term partner
- They suggest leaving features out of the first phase.
- They tell you when a packaged product would serve you better.
- They ask to meet operators, not just managers.
- They explain technical choices in business terms.
- They plan support and improvement after go-live from the start.
About Corposol
Corposol is a custom software development company founded in 2018, based in Bengaluru, India, with a US company, Corposol LLC, in Whitefish, Montana. We build manufacturing software — MES, ERP, CMMS, inventory, quality, planning and shop-floor apps — for factories in India and abroad. We start with a walkthrough of your process, provide a written scope, deliver in phases with regular demos, and transfer all custom code on final payment. Read our use cases or contact us to discuss your project.
Frequently asked questions
Should we choose a large company or a small specialist team?
It depends on the project. Large firms bring scale and process; smaller specialist teams often bring more senior attention and faster decisions. What matters most is manufacturing experience, a clear process, the people who will actually work on your project and how they support you after launch.
Is it risky to work with a development company in another country?
It can work very well with clear scope, regular demos, overlapping working hours and a local contract entity where needed. Ask how they communicate, how often you will see working software and which company you will contract with.
What should be in the contract?
Scope and phases, deliverables, acceptance criteria, payment milestones, change process, intellectual property and code ownership, confidentiality, data protection, warranty, support terms and how disputes are handled.
How many companies should we compare?
Usually two or three serious candidates. Give each the same written brief, attend a walkthrough with each, and compare their understanding of your process as much as their price.
